Microwave laboratory extractor
PZ-TQ-50L microwave extractor
Microwave extraction is that high-frequency electromagnetic wave penetrates the extraction medium and reaches the inside of the extracted material. Microwave energy can be rapidly converted into heat energy to make the internal temperature of the cell rise rapidly. When the internal pressure of the cell exceeds the bearing capacity of the cell wall
After rupture, the effective components in the cell flow out freely, dissolve in the extraction medium at a lower temperature, and then obtain the extraction material through further filtration and separation. Accelerated extraction of material components under microwave radiation
The solvent diffusion at the interface increases the extraction rate several times, and also reduces the extraction temperature, quality and quantity.
The microwave extractor is composed of microwave heating box, microwave generator, double-layer coil, sanitary pump delivery mechanism, auxiliary heating tank and rack system. It is easy to clean, acid and alkali resistant, and the equipment has no blind angle, and does not react with materials
Or chemisorption, meeting the requirements of food safety, machinery and sanitation.
1. Microwave output power P: 0-6kW (linearly adjustable)
2. Microwave output frequency F: 2450 ± 50MHz
3. Rated input power S: ≤ 8.5KVA
4. Power supply voltage U: three-phase 380 ± 10% V
5. Microwave leakage MW/cm2: ≤ 5 (national safety standard)
6. Operating temperature range ° C: 30-90 degrees
7. Fluid velocity range V: 0-15 m/s
8. Internal tank material: 316 stainless steel and food-grade silicone rubber